1.High performance-price ratio, designed with the updated
PIC programming algorithm, higher speed than other similar
products, stable performance, support more devices. Support
online upgrade of programmer hardware, easy and convenient
upgrade. communication modes of USB port, convenient for
application on lap-top computer which doesn’t have serial port
(convenient connection of one USB cable with computer).
Automatic programming function and automatic programming process
enable mass production for customer’s great convenience
(programming available on chip installation without pressing any
2.Overall message indication, audio plus word will enable
customer well informed about operating status.
built-in ICSP interface, support ICSP (in-circuit serial
programming) directly without any additional device. User may
program after circuit board is welded. For FLASH
Microcontroller, online upgrade is available.
with 40pin DIP socket, available for direct programming of
8pin-40pin DIP chip. Programming of other surface mount device (SMD)
is available based on universal adaptor.
5.Compatible with operating systems (OS) including
Windows98, Windows2000/NT and Windows XP, Windows 2003, Windows
6. Function of programming counting, can preset and count
the programming number.
serial number auto-increment, available to set auto-increment
area as program area or EEPROM data area, set auto-increment
system, set auto-increment start address/end address and
auto-increment step, set to ignore high byte in auto-increment
to avoid effect to RETLW instruction in auto-increment part of
supports load of *.HEX or *.BIN files, available to converse
*.BIN files to *.HEX format.
programming data monitoring. Through check summing, available to
find immediately if programming data is changed or not.
Verification and formula are subject to definition of Microchip.
10.Programmer hardware auto-search when start of software,
no need for software setup before use, easier and more
programming success rate, enough programming depth. Programmable
voltage, electrical parameter of programming and programming
algorithm satisfy the technical specifications of manufacturers.
There is no special
requirement for installation of this programmer.
Connect programmer to PC through USB
cable, then the programmer works. (This programmer supports
direct USB power supply, you may not connect external power.
However, if current through USB interface is very low – less
than 200MA and insufficient to drive programmer, connection to
external power is required to enable the programmer to work
QL-PROGvXXen.EXE under root directory of CD, double click this
file to access installation interface of application software,
and operate according to prompts to finish the installation.Its
shortcut will appear on desktop automatically after
After proper installation, shortcut of
this software will appear on desktop. We can double click it to
run the software. (Note: Run the software after proper
connection of hardware so as to identify the hardware easily.)
Interface after start of software is shown below: